Algeria AgencyInfrastructure
Network installation & maintenance
Clean, documented cabling — because a network nobody understands turns every incident into an investigation.
A well-installed network is recognisable by one thing: when something fails, you know where to look. A badly installed one is recognisable by the opposite — every incident starts with half a day spent working out how the cables connect.
The difference is almost never the hardware. It is the labelling: cables marked at both ends, a tidy rack, a current plan, and a diagram somebody else can read. It is the cheapest part of an installation and the first thing removed when a quote needs shrinking.
So we install while documenting, and we deliver the plan with the installation. That plan belongs to you and serves any technician after us, which is exactly the point: you are not obliged to call us back to understand your own building.
Maintenance follows the same logic. A network evolves — a desk added, a printer moved, a camera plugged in — and a plan that is not updated becomes useless within a year. We keep the document current at every intervention.
What we usually find
- Nobody knows which cable goes where, and every incident starts with an investigation.
- Your network rack is a knot of unlabelled cables.
- The Wi-Fi and the wired network were installed by two different suppliers.
- A desk added last year is plugged into a network splitter sitting on the floor.
What changes
Shorter outages
An incident on a labelled installation is diagnosed in minutes rather than half-days.
A plan that belongs to you
Readable by any technician, which removes the dependency on whoever laid the cables.
Room to grow
Headroom planned at installation, because adding a workstation should not require running cable again.
What you get
Labelled cabling
Marked at both ends with a socket plan, which is half the value of any installation.
A tidy rack
Ordered patching, protected power, and restricted physical access.
A network diagram
Delivered with the installation and updated at every intervention, not only on day one.
Spare capacity
Ports and routes planned for future additions, decided with you rather than guessed.
Separated uses
Workstations, cameras, till and guest Wi-Fi kept apart, so an incident does not spread everywhere.
Maintenance and changes
Interventions logged and the plan kept current, so it does not become wrong within a year.
Is this the right fit for you?
This is for you if
- You are fitting out, moving into or extending premises.
- Your current network is undocumented and nobody understands it.
- You have uses that should be separated: till, cameras, guests.
This is not for you if
- Two machines on Wi-Fi in a small office. A good router is enough.
- You want the cheapest cabling with no labelling. That is the saving that costs the most afterwards.
- You cannot access conduits or drill. We will tell you what remains possible.
What we commit to
The plan is delivered with the installation
Not on request, not for a fee. An installation without a plan is one you only half own.
Labelled at both ends
We do not deliver unlabelled cabling, even when it does not appear on a competitor’s quote.
Headroom planned in
We allow room for additions, because running cable again costs more than laying one extra now.
Installing a network in Algerian premises
The state of the building often decides the job. Missing conduits, solid walls, no suspended ceilings: routing cable frequently represents more work than the equipment itself, and estimating it properly means visiting rather than guessing from a drawing.
Power is handled at the same time. A network rack plugged into a socket shared with an air conditioner restarts on every current surge, and the symptom presents as an intermittent network problem nobody can reproduce.
Finally, hardware availability shapes the choice. Equipment whose replacement does not exist locally takes the installation out when it fails. We choose from what can be re-bought here rather than from what has the best specification sheet.
Frequently asked questions
Cable or Wi-Fi?
Both, each in its place. Wired for what is fixed and critical — workstations, till, cameras, access points — and Wi-Fi for what moves. Putting everything on Wi-Fi creates problems nobody can diagnose.
How long does an installation take?
It depends mostly on the building, not on the number of sockets. We visit before quoting, because an estimate made from a drawing is almost always wrong.
Can you take over an existing installation?
Often yes. We start by labelling and documenting it, which already resolves a share of incidents before anything is changed.
Should cameras be separated from the rest?
Yes, almost always. They consume bandwidth continuously and are a frequent way in. Separation costs little at installation and a great deal afterwards.
What happens when we add workstations?
If headroom was planned, it is a patch. If not, it is a building job. That is exactly why we plan headroom from the start.
Is the plan genuinely useful?
It is the most profitable part of the installation. It is invisible on day one and it halves the diagnosis time of every incident for ten years.
How to start
Tell us the floor area, the number of workstations planned, and whether the building has existing conduits.
We visit before quoting. You receive a quote with labelling and the plan included, never as an option.
What we have written on this subject
Cabling: a hundred metres, and not all of them are yours
The standard grants a copper link a hundred metres. Ninety are in the wall and never change; the other ten get spent after you have gone.The cabling you did not lay: taking over premises already wired
No plan, no certification report, and sockets nobody can trace. What to test, what to reuse, and what the lease decides.Moving the business: what to order three months ahead, and the weeks you exist at two addresses
A move tests your whole system at once, on a date a landlord set. The long pole is never the van.Networks: the cheapest layer, and the one that produces half the faults
A network is a chain: it is worth what its worst segment is worth. That is why it gets bought in the order the signal travels.The line is down: establishing which side, and what comes next
Five minutes decide whether the fault is yours or the operator’s. What to record before calling, how to escalate, and what a second line really covers.Professional or consumer Wi-Fi: what actually changes
The speed printed on the box was never the problem. The problem is how many devices are connected at once.
Let us talk about your project
A free audit, no commitment: we look at your online presence and tell you what is holding it back.
- The plan is delivered with the installation
- Labelled at both ends
- Headroom planned in